Hardware Overview

Mechanical Parameters
- Working Temperature: 0°C – 70°C
- Humidity Range: 20% – 90%
- Dimensions: 60mm x 27mm
- Stacking Height:1.5mm
- Input Voltage: 3V
Processor
- ARM Cortex-A832-Bit RISC Processor up to 1GHz
- NEON™ SIMD Coprocessor
- SGX530 3D Graphics Engine
- Up to 24-Bit Data Output,resolution up to 2048 × 2048
Memories
- 512MByte DDR3L@ 400MHz
- 8GBeMMC Or 512MB NandFlash
Interfaces
- One channel GMII interface
- ParallelLCD interface
- 16bit GPMC interface
- Four channel UART interface
- Two channel CAN interface
- USB Host
- USB OTG
- Eight channel ADC inputs
- SPI interface
- I2S interface
- SDIO interface
Data Transfer Interfaces
- Serial Ports
  - UART0, 2line serial port, TTL Logic
  - UART1, 2line serial port, TTL Logic
  - UART3, 2line serial port, TTL Logic
  - UART4, 2line serial port, TTL Logic
- USB Ports:
  - 1 x USB2.0 OTG, 480Mbps
  - 1x USB2.0 HOST, 480Mbps
- MMCcard interface port by GPMC Interface
- 1 channel GMAC
- 1 channel I2C interface
- 1 channel CAN bus

Application

operating system	explain		remarks
Linux	BIOS	x-loader	NAND
			MMC/SD

			FAT

		u-boot	NAND
			MMC/SD
			FAT
			Net burning image is supported

	Kernel	Linux-3.2.0	File system supporting ROM / cram / ext2 / ext3 / fat / NFS / JFFS2 / UBIFS format
	Driver support	CAN, RS485，TFT LCD，Touch screen，NAND Flash，Debug serial port，Ethernet，USB OTG，TF card，Key，USB Device, USB host,LED，RTC，Audio input/output
Android 2.3	Kernel	Linux-3.2.0	Gingerbread
	Driver support	TFT LCD，Touch screen，NAND Flash，Debug serial port，Ethernet，USB OTG，TF card，Key，USB Device, USB host,LED，RTC，Audio input/output
WinCE 7	BIOS	x-loader
			Support NAND startup
			Support TF startup
		e-boot
			Support NAND startup
			Support TF startup
	OAL	OAL module	Boot parameter
			KILT(EMAC)
			Serial debug
			REBOOT
			Watchdog
			RTC
			Kernel profiler
			System timer
			Interrupt controller
			MMU
	Drivers Support	Debug serial port, RTC, Ethernet, NAND Flash, TFT LCD, Touch screen, TF card, USB Device,Audio input/output, RS485, NLED, Keypad, PRU，USB host，USB Device
		PowerVR (2D/3D) DDK & SDK

http://wiki.emtop-tech.com/display/EMTOPHOMEPAGE/SOM-860-E

Data transfer interface:

Two 10/100/1000Mbps Ethernet interfaces (only one network port is supported in WinCE 7 system at this time)
A CAN 2.0 interface and an RS485 interface (8 Pin Phoenix Terminal Connector)
A USB 2.0 High-Speed OTG Portswith Integrated PHY (480Mbps, Mini USB interface)
Two USB 2.0 High-Speed HOST Portswith Integrated PHY (480Mbps, USB-A interface)
A TF card interface (SD/MMC compatible, 3.3V logic)
Serial port:
UART0, RS232 level, DB9 debug serial port
UART2, RS232 Level, DB9 Common Serial Port
UART3, 3.3V TTL level, needle alignment
UART4, TTL level, needle alignment
UART5, TTL level, needle alignment

Audio/video interface:

LCD/touch screen interface (24-bit data RGB full color output, 50-pin FPC connector)
An audio input interface (3.5mm audio interface)
A dual channel audio output interface (3.5mm audio interface)

Transport interface:

LED：

Electrical characteristics: