Hardware DescriptionSoftware DescriptionWiki PageOrdering And Pricing System block diagram: Processor/Memory: AM335x (AM3358,324 contacts BGA) DDR3 4Gb /32 Meg x 16 x 8 banks eMMC 4GB 8-bit data 4KB EEPROM I/O Interfaces: MMC data bus×1 SPI×1 I2C×1 UART×4 (including a debug interface) USB×2 MCASP audio port×1 LCD port×1 ADC port×8 (port 0~3 for resistive touchscreen) GPMC×1 User-defined LED×2 1000M Ethernet PHY ×1 Battery management×1 Supports 24MHz crystal oscillator and 32.768 kHz clock frequency SOM90 connector×2 RoHS compliant Electrical Features: Operating temperature：0~70°C（commercial）、-40~85°C（Industrial ） Input voltage：5V Operating humidity：20% ~ 90%（no condensation） Main board size：70 mm×50 mm PCB specifications：8 layer design Items Notes Operating System Linux4.1.16 Default root file system used by debian Drivers Serial interface Serial interface driver RTC Hardware clock driver Ethernet 10/100/1000M IEEE 1588 Display DVI driver MMC/SD SD2.0 interface and eMMC driver USB High-speed USB interface driver (OTG×1, HOST×1） LED User-defined LED driver http://wiki.emtop-tech.com/pages/viewpage.action?pageId=26935314 Please contact with sales@emtop-tech.com  

Hardware DescriptionSoftware DescriptionSystem On ModuleWiki Page Data transfer interface: Two 10/100/1000Mbps Ethernet interfaces (only one network port is supported in WinCE 7 system at this time) A CAN 2.0 interface and an RS485 interface (8 Pin Phoenix Terminal Connector) A USB 2.0 High-Speed OTG Portswith Integrated PHY (480Mbps, Mini USB interface) Two USB 2.0 High-Speed HOST Portswith Integrated PHY (480Mbps, USB-A interface) A TF card interface (SD/MMC compatible, 3.3V logic) Serial port: UART0, RS232 level, DB9 debug serial port UART2, RS232 Level, DB9 Common Serial Port UART3, 3.3V TTL level, needle alignment UART4, TTL level, needle alignment UART5, TTL level, needle alignment   Audio/video interface: LCD/touch screen interface (24-bit data RGB full color output, 50-pin FPC connector) An audio input interface (3.5mm audio interface) A dual channel audio output interface (3.5mm audio interface)   Transport interface: Two custom keys (MENU, BACK) A reset key  LED： A power indicator Two user…

Hardware DescriptionSoftware DescriptionWiki PageCarrier BoardOrdering And Pricing Hardware Overview Mechanical Parameters Working Temperature: 0°C – 70°C Humidity Range: 20% – 90% Dimensions: 60mm x 27mm Stacking Height:1.5mm Input Voltage: 3V Processor ARM Cortex-A832-Bit RISC Processor up to 1GHz NEON™ SIMD Coprocessor SGX530 3D Graphics Engine Up to 24-Bit Data Output,resolution up to 2048 × 2048 Memories 512MByte DDR3L@ 400MHz 8GBeMMC Or 512MB NandFlash Interfaces One channel GMII interface ParallelLCD interface 16bit GPMC interface Four channel UART interface Two channel CAN interface USB Host USB OTG Eight channel ADC inputs SPI interface I2S interface SDIO interface Data Transfer Interfaces Serial Ports UART0, 2line serial port, TTL Logic UART1, 2line serial port, TTL Logic UART3, 2line serial port, TTL Logic UART4, 2line serial port, TTL Logic USB Ports: 1 x USB2.0 OTG, 480Mbps 1x USB2.0 HOST, 480Mbps MMCcard interface port by GPMC Interface 1 channel GMAC 1 channel I2C interface 1 channel CAN bus Application HMI Medical appliances…

Hardware DescriptionSoftware DescriptionWiki PageOrdering And Pricing SOM-IMX6ULL support 8GB EMMC and 512MB Nand Flash. Feature Details SOM-i.MX6ULL Arm Cortex-A7 MPCore platform Single ARM Cortex-A7 MPCore, including:• 32 KB L1 Instruction Cache • 32 KB L1 Data Cache• Media Processing Engine (MPE) Co-processor• General Interrupt Controller(GIC)• Global Timer • Snoop Control Unit • Target frequency of 528MHz Audio • S/PDIF Input and Output• SAI modules supporting I2S,AC97,TDM On-chip memory • Boot ROM (96KB) • Secure/non-secure RAM (32KB) Memory and storage DDR SDRAM • 512MB DDR3 SDRAM (16-bit bus width) • Maximum 1GB support • 800MHz maximum DDR clock eMMC • 4GB eMMC flash memory option• 8-bits MMC mode • 4~32GB storage option • Nand or eMMC + SPI option • 256MB ~ 4GB storage option Expandable flash (MicroSD) • Meets SD/SDIO 3.0 standard Runs at 4-bits • Supports system boot from SD card • Supports high-capacity SDXC card up to 2TB Network & Wireless Ethernet • 10/100 Mbps Ethernet Controller • Up to 2 MAC (6G2, 6G3 Only Hardware…

Hardware DescriptionChanged elementsFeatures comparisonFirmware migrationWiki PageOrder And Price Information   Beaglebone-BlackD (BB-PI)is totally hardware compatible with BeagleBone-Black which is the most popular development board for developers and the avid hobbyist. It is a lower cost, high expansion focused BeagleBoard® using a low cost Sitara AM3358BZCZ100 Cortex A8 ARM processor from Texas Instruments. The board boots Linux in under 10sec and the user can get started on development in less than 5min with just a single USB cable. The BB Pi is design to replace as much as possible Beagbone Black. It has the most same placement as like Beagbone Black, so the user can migrate their projects to the BB Pi directly without any changes for their shells or accessories. The appearance comparison is as follows: BBPI-BeagleBoneBlack D based on sitara AM3358 processor Sitara AM3358BZCZ100 1GHz, 2000 MIPS ARM Cortex-A8 32-Bit RISC microprocessor On-board HDMI to connect directly to TVs and monitors 512MB…

System On ModuleCarrier BoardSoftware DescriptionWIKI PagePricing And Ordering Memory： IOs for Serial Communication: IOs for High Speed Communication IOs for Multimedia Other Peripherals EVK-AM5728 is a self-developed SOM-AM5728 core board, which is designed with 4-layer PCB. The whole system is oriented to medical instruments, video surveillance, industrial control, communication and other fields. It is an evaluation board based on Ti am572x series SOC. In the compact design, em-tf-bb-am5728 provides rich peripheral interface resources for em-tf-som-am5728 (Gigabit Ethernet interface, USB interface, HDMI interface, audio interface, PCIe interface, mini PCIe interface, msata interface, LCD interface, camera interface, micro SD card, can interface, RS485, Dido interface). In addition, GPMC, SPI, I2C, UART, GPIO and other interfaces are led out through 25×2 and 20×2 double row pins respectively to meet the needs of customer evaluation, with flexible customization. BLOCK DIAGRAM： Electrical characteristics Interface: Software Feature: Software documents： Document Description EM-TF-EVK-AM5728-ReleaseNote-Vxx.pdf Release Note EM-TF-EVK-AM5728-UserManual-Vxx.pdf User Manual…

Hardware DescriptionSoftware DescriptionCarrier BoardWIKI PagePricing And Ordering SOM-AM572x is a powerful system-on-module based on TI’s Sitara AM5728 high performance processor. The ARM allows developers to keep control functions separate from other algorithms programmed on the DSPs and coprocessors. It is built to meet the intense processing needs of 3 major types of modern embedded applications: HMI, Industry 4.0(robots and smart factories) and multimedia. Introduction: Memory： IOs for Serial Communication: IOs for High Speed Communication IOs for Multimedia Other Peripherals Electrical Features: Software Feature: Software documents： Document Description EM-TF-EVK-AM5728-ReleaseNote-Vxx.pdf Release Note EM-TF-EVK-AM5728-UserManual-Vxx.pdf User Manual EM-TF-EVK-AM5728-DevelopmentGuide-Vxx.pdf Development Guide Source Code list： Linux source code Description linux_4.9.28_xxx.gz Linux kernel source code: 4.9.28 version u-boot_2017.01._xxx.tar.gz u-boot source code: 2015.04 Shippment image： LinuxShipmentImage Description EM-TF-EVK-AM5728-TI-ShipmentImage-SDCard-Vxx.rar Arago image with firmwares, SD Card Image EM-TF-EVK-AM5728-TI-ShipmentImage-EMMC-Vxxx.rar Arago image with firmwares, EMMC Image Linux Tools： Linux Tools Description gcc-linaro-6.2.1-2016.11-x86_64_arm-linux-gnueabi.tar.xz Gcc compiler for u-boot, kernel and applications Electrical characteristics Working temperature:…

Hardware SpecificationSoftware InformationWiki PageOrdering And Pricing Feature:   Quad-core ARM Cortex-A53,Plus Cortex-M4,Reserve Jtag; On-board 2GB DDR4(1GB DDR4 Option),16GB eMMC, 8MB SPI FLASH; On-board AzureWave AW-CM256SM WiFi / Bluetooth;(Option) On-board Gigabit Ethernet PHY; On-board ROHM Power Management IC (PMIC); Yocto Linux BSP with source code; Comes with user manual, ready-made system; Interface： USB0 Host x 2 USB OTG x 1 12V Power IN x 1 Up to 77xGPIO (including SPI,I2C,PWM,UART,SAI, and SDIO) USB 2.0 Host (4 Pin Connector) x 1 UART: UART2  (TTL, For Debug)UART3  (TTL, For User)UART4  (TTL, For User) I2C x 3 USB Touch x 1 MIPI-CSI-2 x 1 Fan 5V port x 1 MIPI-DSI x 1 Buzzer x 1SIM Card x 1 TF Card x 1 Mini PCIE Interface x 1, For 4G module and PCIE module CAN Bus x 1 RS485 Bus x 1 Input Terminal x 2 PIN (With Isolation) Output Terminal x 2 PIN (With Isolation) Headphone Output/MIC In…

NXP i.MX8M Nano System On Module

NXP i.MX8M Plus System On Module